Flevo Racer Recumbent Bicycle

Description

Flevo Racer Recumbent Bicycle 00 or best offer
Midframe Hands Free Steering
Here is a demo of hands free starting and stopping.
https://www.youtube.com/watch?v=eyTP5I8hv5Q&t=6s
NuVinci 360 Continuously Variable Hub: The hub can select any point between the upper and lower limit, thus there is never the possibility of getting stuck between gears. I have my gearing range set for the low lying hills of Iowa.
Gates Carbon Center Track Belt Drive: Quiet, never needs adjusting or lubricating. Center tracking belt cleans itself.
Wheels are laced three leading, three trailing with Sapim spokes (spares included). The Tires are Marathon with inner tubes. The parts for the wheels total about 0 each. I have a spare free wheel left from two attempts to build a leaning trike that failed because I didn’t want to weld to the frame.
There are two riding positions, a laid back touring position and a more upright town position. The first 3 photos in the series are in the touring position and the last 3 in the series are in the town position.
The bike is set up for a rider that is about 6 feet tall. It will work for riders 5’10” to 6’2”. The adjustment for different riders is done by moving the crank location nearer or further from the rider. To change that position with the current setup requires changing to a longer or shorter belt or also changing the gears that determine the upper and lower gearing ratios.
Included are essential tools, extra parts and extra accessories. It also comes with a Draftmaster bike rack that cost about 0. The cost of rack includes both a long and short tongue for a 2 inch bumper receiver, a lock for the rack to the receiver and a lock for the skewer for the bike to the rack. The Draftmaster tucks the bike very securely behind the vehicle.
I have over ,000 invested in parts and tools. Everything goes together. Pick up only—from Fairfield, Iowa.